Roofline products
Fascia & Soffit
Marches offer a range of Fascia Boards for use in both new build work, total replacement or refurbishment by covering existing timber. The range of Fascia profiles comprise:
- A traditional 9mm Universal Board which requires a backing board.
- An Ogee Fascia Board which offers an attractively designed alternative to the Universal Board.
- An 18mm Mammoth Board which does not require a backing board to support it, because of its rigid linear strength, and thickness. This makes it extremely suitable for total replacement and new build applications when it is fixed directly to the rafter ends.
- Ogee Mammoth Boardwhich again offers the attractive alternative to the plain mammoth board.
A range of matching PVC-U mouldings caters for all joints and corners.
Soffits can be formed using a number of options:
- Multi-Purpose Board up to a width of 404mm combined with Soffit Vent Strip or Circular Disc Ventilators
- Pre-vented Soffit Board with air slots to provide ventilation to a 10mm or 25mm wide clear airgap, which conform to current building regulations.
- Cladded Soffit using the 150mm Shiplap Cladding< or 100mm V Joint Cladding to give an attractive ribbed effect.
- Rigid PVC-U Hollow Soffit in 100mm, 250mm and 300mm widths provide a cost competitive and effective alternative to cellular boards.
Cladding
The FloPlast PVC-UE Cladding Systems are suitable for external use on buildings as a decorative and protective facing, fixed vertically, horizontally or diagonally over both brick, block, masonry and timber framed walling. When installed correctly this will reduce thermal loss by providing an additional external barrier.
Available in two designs (Shiplap and Open Vee) resembling existing timber profiles. The weather tight joint provided prevents penetration from the elements.
The systems are completed with a range of trims to suit all applications.
The tough and durable finish has a high impact strength and a weather resistant skin which requires little maintenance to retain its excellent appearance.
Window Trim
The FloPlast range of Fascia and Soffits, when used in conjunction with the Window System Trims of quadrants, skirtings and architraves, provide the means to achieve a high quality dry fix finish to window openings and rooms.
Our flat back 6mm pencil round range of architraves produce an aesthetically pleasing finish to your room. The product is suitable for internal and external use. It is traditionally used for skirting, covering broken plaster around windows and for joints around door linings.
Flexible angles 25mm, 35mm and 75mm wide, have a nitrile modified PVC joint and are suitable as a cover trim for bay window mullions.
During installation it is important that the products in the Window System Trims are fixed to a dry and sound substrate. Ensure that the profiles are mitred for external corners and scribe and cut for internal corners. All joints should be fixed using a suitable adhesive or silicone sealant.
Cellular PVC-UE has a thermal expansion similar to rigid PVC, so if secured correctly there should be no relative movement of individual profiles.
When used in accordance with the manufacturers instructions neoprene/rubber solutions, silicone sealant and anaerobic adhesives are suitable for the fixing of cellular PVC-UE trims.
FloTop Stainless steel plastic headed nails provide a maintenance free fixing in some applications.